Cutting forces during longitudinal turning process of Ti-6Al-4V ELI alloy. Theoretical and experimental values

  • Wojciech Stachurski Institute of Machine Tools and Production Engineering, Lodz University of Technology, Lodz, Polska
DOI: https://doi.org/10.30464/jmee.2018.2.3.201
Keywords: Titanium alloys, Turning, Cutting force

Abstract

In the paper, the experimental investigations related with longitudinal turning of Ti-6Al-4V ELI alloy (Grade 23) typically used in aeronautics industry have been presented. The main goal was to determinate the influence of chances a selected cutting parameters (vc and f) for total cutting force Fc and its components. In this case the analysis of components of cutting force Fcmeasured during workshop experimental investigations was carried out. Next, the measured values were compared with the values calculated on the basis of formulas available in the literature. This allowed to state that universal theoretical formulas can also be used to determine the components of the total cutting force F in the longitudinal turning process of Ti-6Al-4V ELI alloy.

Downloads

Download data is not yet available.

Author Biography

Wojciech Stachurski, Institute of Machine Tools and Production Engineering, Lodz University of Technology, Lodz, Polska

author_Stachurski1.png

Wojciech Stachurski received his M.Sc. degree in Production Engineering and Ph.D. degree in Machinery Construction and Operation from Lodz University of Technology, in 2001 and 2008, respectively. Since 2003 he has been a researcher in the Institute of Machine Tools and Production Engineering at the Lodz University of Technology, where currently he works as an assistant professor. His scientific interests focus on abrasive processes, technological researches of the surface texture as well as wear and durability of cutting tools. He has participated in 3 national research projects as well as 5 international and 14 national conferences. He has published more than 60 scientific papers in various international and national journals. He is also the author of 2 national patents.

JMME 2(3) 2018 front cover
Published
2018-12-06
How to Cite
Stachurski, W. (2018) “Cutting forces during longitudinal turning process of Ti-6Al-4V ELI alloy. Theoretical and experimental values”, Journal of Mechanical and Energy Engineering, 2(3), pp. 201-206. doi: 10.30464/jmee.2018.2.3.201.
Issue
Vol 2 No 3 (2018)
Section
Mechanical Engineering

Copyright (c) 2018 Wojciech Stachurski

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain full copyright to their individual works.
The Journal of Mechanical and Energy Engineering (JMEE) publishes fully open access articles.

Open Access benefits:

  • High visibility – all articles are made freely available online for everyone worldwide, immediately upon publication.
  • Increased visibility and readership.
  • Rapid publication.
  • All articles are CC BY licensed. The final article can be reused and immediately deposited in any repository.
  • Authors retain the copyright to their work.

By publishing with us, you retain the copyright of your work under the terms of a Creative Commons Attribution 4.0 International (CC BY) license.

The CC BY license permits unrestricted use, distribution and reproduction in any medium, provided appropriate credit is given to the original author(s) and the source, a link to the Creative Commons license is included, and it is indicated if any changes were made. This means that you can deposit the final version of your work in any digital repository immediately after publication.

We are committed to providing high-level peer review, author and production services, so you can trust in the quality and reliability of the work that we publish.